Gas Pipe

Silver-Line Yellow Polyethylene Gas Pipe & Tubing

The following Silver-Line products meet or exceed the specifications of the described standards:

• Yellow Polyethylene Gas PE 2406 Pipe and Tubing
meets or exceeds the specifications for ASTM D 2513
with a material Type II Grade P24 as defined by ASTM standard D 1248 and
Cell Classification 234363E as defined by ASTM standard D 3350.

• Silver-Line PE 2406 Yellow Pressure Rated Gas Pipe is manufactured using
Polygas™ K38-20-160 with the hydrostatic design basis (HDB) of 1250 psi @ 73F.

In addition, each of the above products are listed by and authorized to bear the mark of NSF International under NSF Standards 14 and compliance certification with the Uniform Plumbing Code’s requirement bearing the mark of NSF-gas U.P.Code for Gas Pipe & Tubing.

Each of the above listed products applications are for Natural Gas distribution systems and LPG distribution systems. PE 2406 pipe and tubing are typically joined by heat fusion (Butt or Socket) or by compression fittings. Pressure ratings are defined in Part 192, Title 49 of the Code of Federal Regulations for the transportation of natural and other gas by pipeline, Department of Transportation, Office of Pipeline Safety. Use recommendation of PE piping systems for LPG and its major components, propane and butane gas is published by the Plastic Pipe Institute (PPI) Report TR-22.

For more information on Gas Pipe refer to our PDF documents. These require Adobe Reader which is available as a free download.

Gas Pipe Products - 75kb