Pressure Pipe

PVC Pressure pipe is primarily used in water service systems. It can be used in residential, commercial, and industrial applications as a water main, to convey water from main to house, or to convey water from well to the house. In addition it can be used in the well to hang the pump or foot valve and for irrigation systems.

Warning: Do NOT use PVC piping systems to store or convey compressed air. Doing so may cause the PVC to shatter explosively and unexpectedly, resulting in severe injury and damage.

Schedule 40
Standard Compliances:

  • ASTM D-1785, standard for pressure pipe (NSF®-pw-G)
  • ASTM D-2665, standard for DWV (NSF®-dwv)
  • Sizes 2″ – 12″ also conform to ASTM F-480, standard for well casing (NSF®-wc)

Material complies with ANSI / NSF® Standard 14 & 61

SCH 40 Belled End 20 ft.

Nominal Size Item Number Outside Diameter Min. Wall Thickness Inside Diameter (Value) Max Working Pressure at 73º F Wt/100' Ft/Pallet
1/2" 35.052 0.840 0.109 0.613 600 PSI 16 6,000
3/4" 35.072 1.050 0.113 0.815 480 PSI 22 8,000
1" 35.102 1.315 0.133 1.038 450 PSI 32 5,200
1-1/4" 35.122 1.660 0.140 1.369 370 PSI 42 5,000
1-1/2" 35.152 1.900 0.145 1.598 330 PSI 51 4,500
2" 35.202 2.375 0.154 2.055 280 PSI 70 2,800
2-1/2" 35.252 2.875 0.203 2.453 300 PSI 111 1,160
3" 35.302 3.500 0.216 3.051 260 PSI 144 1,500
4" 35.412 4.500 0.237 4.007 220 PSI 205 580
6" 35.602 6.625 0.280 6.043 180 PSI 364 520
8" 35.802 8.625 0.322 7.955 160 PSI 546 280
10" 35.910 10.750 0.365 9.991 140 PSI 753 220
12" 35.912 12.750 0.406 11.906 130 PSI 1000 80

*20 ft. Lengths

Schedule 80 Gray
Standard Compliances:

  • ASTM D-1785, standard for pressure pipe (NSF®-pw-G)

Material complies with ANSI / NSF® Standard 14 & 61

 

Schedule 80 Gray

Nominal Size Item Number Outside Diameter Min. Wall Thickness Inside Diameter (Value) Max Working Pressure at 73º F Wt/100' Ft/Pallet
1/2" 16.050 0.840 0.147 0.534 850 PSI 20 6,000
3/4" 16.070 1.050 0.154 0.730 690 PSI 27 8,000
1" 16.100 1.315 0.179 0.943 630 PSI 40 5,200
1-1/4" 16.120 1.660 0.191 1.263 520 PSI 55 5,000
1-1/2" 16.150 1.900 0.200 1.484 470 PSI 68 1,800
2" 16.200 2.375 0.218 1.922 400 PSI 94 1,400
2-1/2" 17.250 2.875 0.276 2.301 420 PSI 144 1,160
3" 17.300 3.500 0.300 2.876 370 PSI 194 760
4" 17.400 4.500 0.337 3.799 320 PSI 286 580
6" 17.600 6.625 0.432 5.726 280 PSI 545 260
8" 17.800 8.625 0.500 7.585 250 PSI 827 280

*Plain End, 20 ft. Lengths

SDR 21
Standard Compliances:

  • ASTM D-2241, standard for pressure pipe (NSF®-pw-G)
  • Sizes 2″ – 6″ also conform to ASTM F-480, standard for well casing (NSF®-wc)
  • 5″ is dual rated SDR 21 / SCH 40 and conforms to D-1785 and D-2241

Material complies with ANSI / NSF® Standard 14 & 61

SDR 21 - Belled End 20 ft.

Nominal Size Item Number Outside Diameter Min. Wall Thickness Inside Diameter (Value) Max Working Pressure at 73º F Wt/100' Ft/Pallet
1/2" 34.052 0.840 0.062 0.711 315 PSI 10 6,000
3/4" 34.072 1.050 0.060 0.925 200 PSI 12 8,000
1" 34.102 1.315 0.063 1.184 200 PSI 16 7,800
1-1/4" 34.122 1.660 0.079 1.496 200 PSI 25 5,000
1-1/2" 34.152 1.900 0.090 1.713 200 PSI 33 4,500
2" 34.202 2.375 0.113 2.140 200 PSI 53 2,800
2-1/2" 34.252 2.875 0.137 2.590 200 PSI 77 1,160
3" 34.302 3.500 0.167 3.153 200 PSI 114 1,500
4" 34.412 4.500 0.214 4.055 200 PSI 189 580
5" 34.502 5.563 0.265 5.012 200 PSI 295 460
6" 34.602 6.625 0.316 5.968 200 PSI 412 520
8" 34.802 8.625 0.410 7.772 200 PSI 688 280
10" 34.902 10.750 0.511 9.687 200 PSI 1088 220

SDR 21 Gasket Joint
Standard Compliances:

  • Joint meets ASTM D-3212, standard for pressure pipe using flexible elastomeric seals (NSF®-pw-G)
  • Gasket meets ASTM F-477, made from an elastomeric ring

OD average dimensions conform to IPS (Iron Pipe Size)
Material complies with ANSI / NSF® Standard 14 & 61

SDR 21 - Gasket Joint 20 ft.

Nominal Size Item Number Outside Diameter Min. Wall Thickness Inside Diameter (Value) Max Bell Outside Diameter Max Working Pressure at 73º F Wt/100" Ft/Pallet
1-1/2" 34.162 1.900 0.090 1.706 3.130 200 PSI 34 4,500
2" 34.262 2.375 0.113 2.140 3.650 200 PSI 55 2,800
2-1/2" 34.562 2.875 0.137 2.590 4.200 200 PSI 78 1,160
3" 34.362 3.500 0.167 3.153 4.900 200 PSI 118 1,500
4" 34.462 4.500 0.214 4.055 6.000 200 PSI 189 1,000
6" 34.662 6.625 0.316 5.968 8.340 200 PSI 412 420
8" 34.862 8.625 0.410 7.772 10.750 200 PSI 700 300

SDR 26
Standard Compliances:

  • ASTM D-2241, standard for pressure pipe (NSF®-pw-G)
  • Sizes 2″ – 8″ also conform to ASTM F-480, standard for well casing (NSF®-wc)
  • Sizes 2″ – 8″ are laying length

Material complies with ANSI / NSF® Standard 14 & 61

SDR 26 - Belled End 20 ft.

Nominal Size Item Number Outside Diameter Min. Wall Thickness Inside Diameter (Value) Max Working Pressure at 73º F Wt/100' Ft/Pallet
1-1/4" 32.122 1.660 0.064 1.527 160 PSI 21 5,000
1-1/2" 32.152 1.900 0.073 1.748 160 PSI 28 4,500
2" 32.202 2.375 0.091 2.186 160 PSI 43 2,800
2-1/2" 32.252 2.875 0.110 2.646 160 PSI 61 1,160
3" 32.302 3.500 0.135 3.219 160 PSI 93 1,500
4" 32.412 4.500 0.173 4.140 160 PSI 156 580
5" 32.502 5.563 0.214 5.118 160 PSI 240 460
6" 32.602 6.625 0.255 6.095 160 PSI 336 520